RIGrunner is the most convenient and safest way to connect all of your 12 volt equipment to a power source. The 4010S+ is the only power strip that has solid state relay controlled automatic or manual on/off switching. Whatever device is plugged in to the master jack automatically controls power switching of nine switched outlets. It uses the excellent Anderson Powerpole® connectors, standardizing all of your 12VDC connections.
40 amp 12VDC continuous duty with 10 outlets - one always on "Master" outlet and nine switched outlets
Switched outlets controlled by solid state relay with temperature and over-current protection
Three position control switch turns switched outlets on, off or enables automatic operation
Precision voltage monitoring with visual/audible alarm for over and under voltage
PWRguard shut-off when voltage is out of range
(Internal) USB port for setting operating features and the trip points (USB cable not included)
Ability to set the master port sensitivity level
Remote access to turn ON/OFF via the USB port
Optional vehicle timer mode - auto shut off when engine is off after set time (1 second to 18 hours)
Optional automatic turn on when vehicle engine starts
Jumper for power-saving mode turns LEDs off when unit is off
Overall Dimensions (maximum, w/o cables) 1.4" H x 11.75" W x 2.79" D
Weight 14 oz.
Maximum total current 40 amps
Maximum single individual outlet current 40 amps (fuse protected)
ICAS current rating (fuse limited) 37 amps
Precision comparator window points 11.5,15.0 Volts
Metering Accuracy better than 2% @ 25 deg.C.
Audible alert SPL output ~ 60dB SPL @ 1 meter
Maximum voltage 19 volts
Reverse polarity protection (meter circuit) Yes
4010S Automatic switching threshold Most radios with appropriate master outlet fuse